gaas sp6t 2.5 v high power switch dual / tri / quad - band gsm applications v6 maswss009 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support features ? supplied as known good die ? dual/tri/quad - band gsm/gprs/edge ? low voltage: 2.5v operation ? low harmonics: - 72 dbc at +35 dbm & 1 ghz ? low insertion loss: 0.5 db at 1 ghz ? high tx - rx isolation: 38 db at 2 ghz description m/a - coms maswss0091 is a gaas phemt mmic single pole six throw (sp6t) high power switch die. the maswss0091 is ideally suited for applications where high power, low control voltage, low insertion loss, high isolation, small size and low cost are required. the maswss0091 is designed for dual - , tri - , and quad - band gsm and dcs/pcs handset systems that connect separate transmit and receive functions to a common antenna, and can be used in all systems operating up to 2.5 ghz requiring high power at low control voltage. the maswss0091 is fabricated using a 0.5 micron gate length gaas phemt process. the process features full passivation for performance and reliability. ordering information 1 part number package MASWSS0091SMB sample test board maswss0091 - die separated die on grip ring 1. die quantity varies. die layout pad layout pad name description tx1 tx1 port vtx1 tx1 control ant antenna port vtx2 tx2 control tx2 tx2 port vrx4 rx4 control rx4 rx4 port gnd ground rx3 rx3 port vrx3 rx3 control vrxc rx common control vrx2 rx2 control rx2 rx2 port gnd ground rx1 rx1 port vrx1 rx1 control ant redundant ant pad parameter absolute maximum input power (0.5 - 2.5 ghz, 2.5v control) +38 dbm voltage 8.5 volts operating temperature - 40c to +85c storage temperature - 65c to +150c absolute maximum ratings 2 2. exceeding any one or combination of these limits may cause permanent damage to the device. vtx1 gnd vrx2 vrx4 tx2 ant vtx2 rx2 vrx3 rx4 tx1 ant rx3 gnd vrxc rx1 vrx1
gaas sp6t 2.5 v high power switch dual / tri / quad - band gsm applications v6 maswss009 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support electrical specifications: t a = 25c, vc = 0v/2.5v, z 0 = 50 ohms 3 parameter test conditions units min. typ. max. tx insertion loss 3 0.5 - 1 ghz 1 - 2 ghz db db 0.5 0.65 0.7 0.9 rx insertion loss 3 0.5 - 1 ghz 1 - 2 ghz db db 1.0 1.3 1.2 1.6 tx to rx isolation 0.5 - 1 ghz 1 - 2 ghz db db 40 45 38 tx to tx isolation 0.5 - 1 ghz 1 - 2 ghz db db 22 26 17 return loss 0.5 - 2.5 ghz db 20 tx p0.1db 1 ghz dbm 41 rx p1db 1 ghz dbm 25 2nd harmonic 1 ghz, p in = +35 dbm, 100% duty cycle dbc - 78 - 67 3rd harmonic 1 ghz, p in = +35 dbm, 100% duty cycle dbc - 72 - 67 trise, tfall 10% to 90% rf, 90% to 10% rf s 0.2 ton, toff 50% control to 90% rf, and 50% control to 10% rf s 0.2 transients in band mv 70 control current a 20 80 3. external dc blocking capacitors are required on all rf ports. 4. insertion loss can be optimized by varying the dc blocking capacitor value, e.g. 100 pf for 0.5 ghz - 2.0 ghz. qualification qualified to macom specification rel - 201, process flow C 2. handling procedures please observe the following precautions to avoid damage: static sensitivity gallium arsenide integrated circuits are sensitive to electrostatic discharge (esd) and can be damaged by static electricity. proper esd control techniques should be used when handling these devices. functional schematic tx1 tx2 vtx1 vtx2 ant vrxc vrx1 rx1 vrx2 rx2 rx3 rx4 vrx3 vrx4 100pf 100pf 100pf 100pf 100pf 100pf 100pf gnd gnd
gaas sp6t 2.5 v high power switch dual / tri / quad - band gsm applications v6 maswss009 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support typical performance curves tx insertion loss tx - rx isolation 3rd harmonic vs. vctrl @ 1 ghz, pin = +35 dbm, 100% duty cycle rx insertion loss 2nd harmonic vs. vctrl @ 1 ghz, pin = +35 dbm, 100% duty cycle
gaas sp6t 2.5 v high power switch dual / tri / quad - band gsm applications v6 maswss009 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support vtx1 vtx2 vrxc vrx1 vrx2 vrx3 vrx4 ant - tx1 ant - tx2 ant - rx1 ant - rx2 ant - rx3 ant - rx4 1 0 0 0 0 0 0 on off off off off off 0 1 0 0 0 0 0 off on off off off off 0 0 1 1 0 0 0 off off on off off off 0 0 1 0 1 0 0 off off off on off off 0 0 1 0 0 1 0 off off off off on off 0 0 1 0 0 0 1 off off off off off on truth table 5,6 5. differential voltage, v (state 1) - v (state 0), must be 2.5 v minimum. 6. state 0 = 0 v to +0.2 v, state 1 = 2.5 v to 5 v.
gaas sp6t 2.5 v high power switch dual / tri / quad - band gsm applications v6 maswss009 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support m/a - com technology solutions inc. all rights reserved. information in this document is provided in connection with m/a - com technology solutions inc ("macom") products. these materials are provided by macom as a service to its customers and may be used for informational purposes only. except as provided in macom's terms and conditions of sale for such products or in any separate agreement related to this document, macom assumes no liability whatsoever. macom assumes no responsibility for errors or omissions in these materials. macom may make changes to specifications and product descriptions at any time, without notice. macom makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. no license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. these materials are provided "as is" without warranty of any kind, either express or implied, relating to sale and/or use of macom products including liability or warranties relating to fitness for a particular purpose, consequential or incidental damages, merchantability, or infringement of any patent, copyright or other intellectual property right. macom further does not warrant the accuracy or completeness of the information, text, graphics or other items contained within these materials. macom shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. macom products are not intended for use in medical, lifesaving or life sustaining applications. macom customers using or selling macom products for use in such applications do so at their own risk and agree to fully indemnify macom for any damages resulting from such improper use or sale.
|
